Remote Access Module Optical Specifications
Wavelength: 1310/1550nm
Optical output power: 0 dBm to -3 dBm/-5 dBm to -10 dBm
Receiving sensitivity: <-26dBm
Single wavelength bandwidth: 155 - 622Mb/s
Convergence Node Transceiver Optical Specifications
Wavelength: 1310/1470/1490/1510/1530/1550/1570/1590/1610nm
Transmission rate: 2.5G x wavelength channels
Optical output power: 0 dBm to -3 dBm / -5 dBm to -10 dBm
Receiving sensitivity: <-25dBm
Single wavelength bandwidth: 2.5Gb/s
Convergence Index
Single wavelength convergence ability: Sixteen front end transmitters
Single fiber convergence ability: 128 front-end transmitters
Video
Video channel: 1 to 128
Video format: NTSC, PAL, SECAM
Voltage: 1VP-P, 75Ω
Max-input voltage: 1.5VP-P,75Ω
Bandwidth: 7.5 MHz
Differential gain: ≤0.7%
Differential phase: ≤0.7°
Video SNR: ≥70dB
Encoding: 10-bit PCM
Connector: BNC
RS232 Data
Standard: E1A/TIA-232E,CCITV.28
ESD protect: ±15kV body static
±8kV IEC1000-4-2 contact discharge
±8kV IEC1000-4-2 discharge by air
Baud rate: 0-115.2kb/s
Bit error rate: 10-9
RS-422/485 Data
Standard: TIA/EIA-422-B,TIA/EIA-485-A,ITUV1.1
ESD product:±15kV body static
±8kV IEC1000-4-2 contact discharge
±8kV IEC1000-4-2 discharge by air
Baud rate: 0-115.2kbps
Bit error rate: 10-9
Contact Closure Signal
Input/output: Relay interface
Interface: RJ45
Ethernet Data
Standard: IEEE802.3
Port No. Rate: 10M/100M adaptive
Port No.: 1 - 4 10M/100M exchange port
E1 Signal
Interface: In accordance with ITU-TG.703
Data Rate: 2.048Mb/s
Circuitry code type: HDB3
Interface impedance: 75Ω/120Ω
Interface type: Q9 (75Ω), RJ45 (120Ω)
Telephone Channel
Telephone Port: In accordance with GB3378-82
Relay Port: In accordance with GB3971-83
System parameter
MTBF>100,000 hours
System bit error rate:better than 10-9
Indicator light system: Optical Connection
Video lost detection
Fiber link
Electrical Feature
Power supply:
OB9211D(XX)-XX-XX-X-A
Specification: +5.5v-6VDC
Sources: plug-in frame backplane, 96-pin interface
OB9211D(XX)-XX-XX-X-B
Requirement: +5.5v-6VDC
Sources: power adapter, 5-pin self lock interface
Power consumption: 6W
Mechanical Features
OB9255DTR/R(XX)-XX-XX-X-A
Rack-mount: OB18 chassis
Dimension: 442 x 178 x 222 mm
Weight: 3.5kg
Material: Aluminum
Surface finish: sandblast oxidation
Color: silver gray
OB9255DT(XX)-XX-XX-X-B
Stand-alone: OB2A chassis
Environment
Operating temperature: -40°C to 74°C
Storage temperature: -55°C to 85°C
Humidity: 0 to 95% non-condensing
Electromagnetic Compatibility
Accord with GJB151A-97, SC
Operating Status Indicators
OB9255DT
POWER: Power indicator
LINK: Optical link lock indicator
VIDEO: Video transmission indicator
DATA: Data transmission indicator
OPT: Optical receiving port
OB9255DTR
POWER: Power indicator
LINKTM: Central optical link lock indicator
LINKRA - LINKRD: 4 front-end link optical lock indicator
OB9255DR
POWER: Power indicator
LINK: Optical link lock indicator
VIDEO: Video transmission indicator
DATA: Data transmission indicator
Ordering information
OB9255DXX(XX)-----XX-----XX-----X-----X
1 2 3 4 5 6 7
Segment 1: “T” - remote access module, “TR” - convergence node transceiver, “R” - central receiver.
Segment 2: Input/output video channels.
Segment 3: Input/output data channels.
Segment 4: Transmission distance, measured by kilometers, usually 20km, 40km, 60km, 80km
Segment 5: Optical connector type, including FC, ST and SC
Segment 6: Fiber type, M - multimode, S - single-mode
Segment 7: Box type, A - rack-mount, B - stand-alone, C - standard
Ordering instruction:
OB9255DT/TR/R(XX) device, normally it can designates the configuration of forward video and duplex data, if other signals are needed, e.g. audio/contact closures/Ethernet signal/E1 signal/telephone/AIPHONE, it is shown as follows:
The configuration of audio/contact closures/Ethernet signal/E1 signal/telephone/AIPHONE can be indicated by adding signs after XX:
|
Signal type |
forward |
reverse |
duplex |
Remark |
|
audio |
A↑ |
A↓ |
A↑↓ |
|
|
data |
D↑ |
D↓ |
D↑↓ |
The data can be RS422/RS485/RS232 |
|
Contact closure |
K↑ |
K↓ |
K↑↓ |
|
|
Ethernet |
|
|
10M/100M |
|
|
E1 signal |
|
|
E1 |
|
|
telephone |
|
|
TEL |
|
|
AIPHONE |
|
|
I |
|
e.g.: 1 channel digital video + 1 channel reverse data remote access module: OB9255DT(1V1D↓1A↑)
4 channel video+4 channel forward audio+4 channel reverse data convergence node transceivers: OB9255DTR(4V4D↓4A↑)